Universal Joints

Every execution is made by 2 hubs with forks and a central block. Between pins and bores there are:

P series: 4 bearings with solid pins E series: with sliding bushings

H series: with needle roller bearings

In the central blocks of P and E series there are the holes for the lubrication.

For the H series (for high speed applications) no lubrication is needed, because the roller bearing are maintenance free.

P series joints are designed for high precision and lifetime applications. E series joint with sliding bushings are used for low-medium speed and when some shock load can occur.

For high speed and medium torque, we suggest the type H with roller bearings.

The maximum working angle is 45° for single joints, 90° for dou­ble joints.

The maximum speed is 1000 rpm for P and E series, 4000 rpm for H series.

Every execution can be supply with an extendable shaft.